FRP Pumps

ISO 9001:2008 Certified

Magnatex/Argal MFRP ANSI Mechanical Seal Pumps are designed to handle the most demanding corrosive services in chemical process facilities, aquaculture facilities, aquariums, steel plants, pulp and paper plants, electric utility plants, industrial and municipal wastewater treatment plants. All wet end parts are manufactured from high strength fiberglass reinforced polyester (FRP) in order to resist corrosion, abrasion and operating temperatures between -50°F (-45°C) and 250°F (120°C). The pumps are manufactured to conform to ANSI B73.1 dimensional requirements and are available in both close coupled and long coupled configurations, depending upon your preference.

FRP Pumps

Fiberglass Reinforced Plastic Pumps

Manufacturing Process

The pumps are manufactured using the RTM injection molding process. Reinforcing layers of fiberglass mat are placed in molds prior to injecting the appropriate resin, depending on the application. The use of layers of different weight mats produces a finished product of the highest possible mechanical strength, comparable to stainless steel or alloy pumps, so that a casing armor is not required to reinforce the strength of the pump. Thermoset resin pumps offer higher strength, thermal and dimensional stability and much longer life than competitive thermoplastic pumps.

Applications

Depending on the application, the use of different formulations of epoxy vinyl ester resins provides a broad spectrum of chemical and abrasion resistance, such that the pumps are commonly used in industrial and municipal waste water treatment facilities, water parks, large scale aquariums, zoos and aquaculture farms.


MFRP-C-ANSI Mechanical Seal Series Pumps

Request a Phone Call

Full Name

Phone Number

Email

Please Contact Me Regarding

MAGNATEX® MFRP-L ANSI Specifications

Maximum Flow 1800 GPM
Maximum Head 450 FT
Liquid Temperature -50°F (-45°C) to 250° F (120°C)

MAGNATEX® MFRP-L ANSI Fiberglass Resin/Applications

V1G standard vinyl ester resin compound General purpose
V1A vinyl ester resin compound Abrasive liquids
V1C vinyl ester resin compound Bleaches applications
V1F vinyl ester resin compond Flouridric applications

MAGNATEX® MFRP-C ANSI Specifications

Maximum Flow 1200 GPM
Maxiumum Head 246 FT
Liquid Temperature -50°F (-45°C) to 250° F (120°C)

MAGNATEX® MFRP-C ANSI Market/Applications

Aquariums/Zoos Salt water
Chemical Process Acids / Chemical waste / Waste water
Desalination Filtration / Seawater In-take / Chemical Transfer / Concentrated Brine
Electronic Utilities Coal pile run-off
Electronics Acids / Chemical waste
Metal Finishing Chromic acids / Pickling acids / Plating solutions
Petrochemical Acids / Chemical waste
Pharmaceutical Organic Solvents
Pulp and Paper Bleach
Mining Abrasives and Corrosives
Scrubbers/Odor Control Acids and Caustics