- Home
- /
- Pumps
- /
- Mechanical Seal Centrifugal Pumps
- /
- S Series
ISO 9001:2008 Certified
Mag-Drive Close Couple SM200 Series
Mag-Drive Close Couple SM400 Series
Mag-Drive Close Couple SM900 Series
Mag-Drive Close Couple RM100 Series
Metallic S200 Series Cutway
Metallic R100 Series
Metallic S900 Series
Non-Metallic Ryton S900
Non-Metallic Ryton S200
Chemsteel Features
Seal-Less Magnetic Drive SM207 Pump Dimensions
S207 Metallic Close Coupled Pump Dimensions
S207 Non-Metallic Close Coupled Pump Dimensions
Seal Housing
Ported for flush, drain, barrier fluid and lantern packing lubrication Access to
seals without removal of cover
Upper Drive Standard
Lends itself to in-line pump seal maintenance without leakage of trapped
chemicals Easily converted to a lower drive configuration
Optional Bearing Flush Ports
To extend bearing life when pumping non-lubricating fluids or fluids with a small degree of fine solids
Interfacing to World Standards
NPT & BSPT porting Metric pump hardware Close-coupled adapters for NEMA and IEC standard motor frame sizes
BI-Directional Operation
For applications requiring reversing flow
Body/Cover Static O-Rings
Teflon® encapsulating silicone for sealing with a memory
Combined Bearing ∓ Wearplate
Full size bearings match the gear diameter and eliminate the need for separate
wear plates Gear trimming for desired flow rates Made of carbon-graphite,
Teflon© or Rulon©
Helical Gears
Noise reduction up to 10 db
Extended Life
Gear & bearing combinations of metallic and non-metallic wear surfaces Slotted bearings to lubricate shaft and gear surfaces Hydraulic porting to balance axial thrust and reduce wear
Metallic & Non-Metallic
Wide range of capability Effective weight and cost selection
Dynamic Seal Options Include
Single or double mechanical wedge & bellows styles Standard compression packing Lantern Ring compression packing Lip seals
Chemsteel Tandem Pumps
Tandem Pumps double the output flow for a single fluid.
Or with isolation, handle different fluids in direct ratio to each other.
Mag Drive Catalyst Pumps
Chemsteel Magnetic Gear Pumps are engineered to safely handle hazardous, toxic, highly corrosive or explosive chemicals.
Available in: Stainless Steel, Alloy C and Ryton
Ryton©
Polyphenylene Sulfide PPS, an engineered, reinforced plastic, offering a wide range of chemical compatibility, physical stability, and high temperature resistance (to 200° F).
Type 316
An all purpose austenitic stainless, excellent corrosion resistance; premium choice of all 300 series alloys.
Alloy C
Most used of exotic high/nickel alloys. Superior corrosion resistance for severe alkaline and acidic pumping applications.
Gears
Precision machined metallic gears of 316SS, W88 stainless, and Alloy C. Also available in glass reinforced Teflon©, Ryton© and carbon reinforced PEEK.
Shafts
Shafts are 316 stainless steel or Alloy C.
Seals
Single and/or double mechanical seals are offered in elastomer bellows and Teflon© wedge designs. Bellows design available with Viton© or EPDM formed elastomer shaft seal. Wedge designs available with Teflon© wedge shaft seal and perfluoroelastomer stationary seat o-rings. Packing materials: Teflon©, Grafoil© and Teflon©/Graphite.
Body/Cover O-Rings
Teflon© encapsulating, silicone o-rings provide elastic memory to assure an effective long lasting seal. Avoiding the re-torquing required of pumps using pure TFE.
Close coupled mag drive pumps
Body Stainless Steel, Ryton and Alloy C constructions
Gears Ryton©, Peek, 316 SS, W88, Alloy C and Teflon©
Shafts 316 SS or Alloy C
Bearings Carbon, Teflon© and Rulon©